Load data for 9 mm Steyr (Roth) + .355 | 115gr | Hornady FMJ RN ENC

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 115gr \| Hornady FMJ RN ENC
Manufacturer SKU:	35557
Bullet Weight:	115gr \| 7.5g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	<<locked>>
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B2767_C1226
Last updated:	2026-03-10

Load data for 38 loads in caliber 9 mm Steyr (Roth) with .355 | 115gr | Hornady FMJ RN ENC bullet and 19 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	80%	17608	90%	**29	82%
Alliant BE-86	<<locked>>	63%	17521	89%	**89	100%
Alliant Herco	<<locked>>	76%	17448	89%	**22	96%
Alliant UNIQUE	<<locked>>	64%	17593	90%	**32	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	77%	17579	90%	**73	100%
Hodgdon TrailBoss	<<locked>>	96%	11835	60%	**2	100%
Maxam CSB 1	<<locked>>	66%	17390	89%	**79	100%
Maxam CSB 2	<<locked>>	65%	17477	89%	**12	100%
ReloadSwiss RS 14	<<locked>>	96%	10733	55%	**6	100%
ReloadSwiss RS 20	<<locked>>	67%	17158	88%	**38	98%
[Rottweil P 806]*	<<locked>>	81%	17579	90%	**47	88%
SNPE Vectan A0	<<locked>>	65%	17085	87%	**73	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	72%	17579	90%	**15	88%
[SNPE Vectan SP 2]*	<<locked>>	65%	17463	89%	**88	83%
Vihtavuori 3N37	<<locked>>	68%	17303	88%	**42	90%
Vihtavuori N32C Tin Star	<<locked>>	78%	17521	89%	**10	100%
Vihtavuori N340	<<locked>>	63%	17289	88%	**99	96%
Vihtavuori N350	<<locked>>	71%	17376	89%	**38	90%
Winchester AutoComp	<<locked>>	64%	17332	88%	**96	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	77%	16433	84%	**96	80%
Alliant BE-86	<<locked>>	61%	16476	84%	**60	100%
Alliant Herco	<<locked>>	61%	11719	60%	**8	90%
Alliant UNIQUE	<<locked>>	61%	16201	83%	**89	95%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	11139	57%	**5	100%
Hodgdon TrailBoss	<<locked>>	85%	9761	50%	**7	100%
Maxam CSB 1	<<locked>>	60%	14953	76%	**14	99%
Maxam CSB 2	<<locked>>	61%	15490	79%	**66	100%
ReloadSwiss RS 14	<<locked>>	87%	9239	47%	**0	98%
ReloadSwiss RS 20	<<locked>>	61%	14098	72%	**53	96%
[Rottweil P 806]*	<<locked>>	70%	12227	62%	**76	80%
SNPE Vectan A0	<<locked>>	62%	15722	80%	**33	95%
[SNPE Vectan BA7 1/2]*	<<locked>>	61%	12807	65%	**4	82%
[SNPE Vectan SP 2]*	<<locked>>	61%	15084	77%	**22	80%
[Vihtavuori 3N37]*	<<locked>>	61%	13967	71%	**43	85%
Vihtavuori N32C Tin Star	<<locked>>	61%	11371	58%	**3	100%
Vihtavuori N340	<<locked>>	61%	16259	83%	**73	96%
[Vihtavuori N350]*	<<locked>>	61%	12850	66%	**04	84%
Winchester AutoComp	<<locked>>	61%	15983	82%	**60	99%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data